Delta WASP 2040 Clay
The clay 3D printer. Our Delta WASP 2040 Clay is the ideal equipment for clay printing.
Accurate and fast using all ceramic materials. Clay 3D printer open and accessible on three sides to interact during the prints. Compact professional clay 3D printer, prints up to 40 cm in height.
Made in Italy delta 3D printer, with a clean design and compact dimensions. The aluminum and steel structure guarantees stability and precision, obtaining quality prints with dense fluid materials.
TECHNICAL INNOVATIONS
- Extruder with controlled dosage thanks to a screw
- Controlled air pressure on the printer
- Perfect stability thanks to new sliding-system on bearings
- Dedicated Firmware
- Air pipe connection integrated into the printer
TECHNICAL FEATURES
Printing volume Ø 200mm x h 400 mm;
Minimum layer height 0,5 mm;
Maximum print speed 150 mm/s;
Maximum travel speed 150 mm/s;
Acceleration 500 mm/s2;
MATERIALS
Material porcelain, earthenware, gres, clay etc
CONFIGURABLE TOOLS
LDM WASP extruder with 1.2 mm, 2 mm nozzle (standard)
SOFTWARE
Operative systems WIndows, Mac, Linux;
Slicing software compatible with all slicing software (Cura – SLic3r – Simplify3D®);
File type .stl, .obj, .gcode;
INTERFACE
SD Card
LCD Screen
PHYSICAL DIMENSIONS
Dimensions 44 cm x 49 cm x h 87 cm
Machine weight 40 kg
Dimensions and weight for the cardboard packaging on pallet 50 cm x 58 cm x 101 cm, weight 50 kg
SUPPLY
Input 220/240 V 50/60 Hz (110 V available)
Absorbed power 180 W
N.B. air compressor needed (min. pressure 8 bar)
TEMPERATURE
Use 20-30 C°;
Warehouse 0-30 C°;
MECHANICS
Frames and carters metal sheet (lowers the machine vibrations, grants the best print quality), aluminum, painted steel
Print bed bed in wooden multi-layer
Movements guides on anodized aluminum, open sides give the possibility to stop the printer and interact with the part during the print
EXTRA
RESURRECTION SYSTEM
A system which allow users to save their print job and resume it in the case of power failure.
FREE Z-SYSTEM
The machine measures the height of interruption of the print and it restarts there.
INCLUDED
- 1 LDM Wasp extruder with stainless steel nozzle set diam. 1.5, 2, 3 mm
- 1 3L tank
- 1 printing plate in Marine Multilayer
- 12 kg of red earthenware (clay mixture)
Dimensions and weight for the cardboard packaging on pallet 50 cm x 58 cm x 101 cm, weight 50 kg
NB. The air compressor and the pipe that connects it to the 3D printer are not supplied by WASP.
A useful tip: It’s a nylon pipe and it’s a tool generally supplied by the air compressor supplier. If you don’t have it you can buy it from any hardware store of the length you need, ask for an 8 mm (external dimension) nylon pipe.
